UNIFOREST Forestry winches2 X 85 H / Hpro
he double drum winch head 2x85H / Hpro is the best-selling model of winch head, which is fixedly mounted on the tractor.
- SMART 3in1
- Unwinding device
- Large drum capacity
- Worm gearbox for maximum load transfer
- Strong pulling force even when the drum is fully wound
The double drum winch head 2×85 Hpro with pulling force of 8,5 t has a double pulley and an unwinding device with two feed rollers and hydraulic motors for wire rope greater tension and greater unwinding force. Moreover, it has a SMART 3in1 function. The double drum winch head 2×85 H is the basic version without unwinding device and SMART 3in1 function. Both models have an extra large drum capacity, which allows more wound up wire rope.
(1) When pulling logs with a tractor, you may encounter some obstacles on the road (hill, roots etc.). If the tractor is not able to overcome these obstacles, the unwinding function can be switched into the mode without the assistance of the unwinding device and you can continue driving with a taught wire rope between the winch and the load. (2) The unwinding device can be turned on and off without delay (the standard model has a 1.5 sec. delay). (3) The SMART 3in1 function ensures additional tension of the wire rope between the unwinding pulley and drum.
This function is only available with the remote controls Teleradio, Terra funk and manual console.
|Drive||Worm gear||Worm gear|
|Pulling force – internal/external diameter||kN||85 / 56||85 / 56|
|Wire rope medium speed||m / s||0,60 (540 min-1)||0,60 (540 min-1)|
|Drum capacity length/diameter||m / mm||80 / 13|
90 / 12
|80 / 13|
90 / 12
|Recommended min. tractor power||kW / HP||60 / 80||60 / 80|
|Weight without wire rope||kg||380||450|
|PTO shaft revolutions|
|11 – 15||11 – 15|
|Winch mounting plate||Standard||Standard|