UNIFOREST Forestry winches G – 85 GF
The 85 GF forestry winch is the only professional winch for installation at the front or rear.
- SMART 3in1
- AUTO STOP function (limit switch)
- Unwinding device
- Dual PTO for front/rear mounting
- Convenient positioning
- Maxi drum
- Large storage spaces in front of winch
- Plenty of storage area for additional equipment
- Drive over bevel helical and spur gears
- Hydraulic hinged butt plate
- Foldable window guard
SMART 3in1
(1) When pulling logs with a tractor, you may encounter some obstacles on the road (hill, roots etc.). If the tractor is not able to overcome these obstacles, the unwinding function can be switched into the mode without the assistance of the unwinding device and you can continue driving with a taught wire rope between the winch and the load. (2) The unwinding device can be turned on and off without delay (the standard model has a 1.5 sec. delay). (3) The SMART 3in1 function ensures additional tension of the wire rope between the unwinding pulley and drum.
This function is only available with the remote controls Teleradio, Terra funk and manual console.
UNWINDING DEVICE AND AUTO STOP
To make the wire rope unwinding easier you can choose a winch with an integrated unwinding device. This type of winch also guarantees a constant tension of the wire rope between the unwinding pulley and the drum, thus preventing damage to the drum or pulley and enabling a longer service life.
AUTO STOP function(limit switch) automatically stops the function of winding the wire rope on the drum. This function prevents mechanical damages of the unwinding device, entanglement and wire rope damages.
Technical data
| Model | 85 GF | |
|---|---|---|
| Drive | Worm gear | |
| Pulling force – internal/external diameter | kN | 85 / 56 |
| Brake force | kN | 106 |
| Wire rope medium speed | m/s | 0,50 (540 min-1) |
| Drum capacity length/diameter | m/mm | 118/13 130/12 |
| Recommended tractor power | kW / HP | 74 / 100 |
| Clutch plates | pcs | 6 |
| Pump | Gear pump | |
| PTO shaft revolutions | min-1 | 750 |
| Oil pressure | MPa | 11 – 15 |
| Width | mm | 1920 |
| Hydraulic hinged butt plate | mm | 2100 – Option |
| Depth Height without safety guard Height with safety guard | mm | 930 1500 2300 |
| Weight without wire rope: 1920mm / 2100mm | kg | 680 / 720 |
| Unwinding device | Standard | |
| Wire rope guide | Standard | |
| Auto Stop function | Option | |
| Smart 3in1 | Standard |
Gallery
